Chrome Powder Iridescent Effect BN04 Iridescente

• After applying your preferred Semi-Permanent Base Coat or Gel Polish, apply a coat of Top Reflex NO WIPE. Cure for 30 seconds under a UV/LED lamp.
• As soon as you remove your nail from the lamp, rub the powder over it with the sponge applicator or your finger. Dust off any excess powder with a soft brush.
• If the powder doesn't stick properly, degrease the nail with Cleaner and, without letting it evaporate completely, apply the powder again. If any stains remain, degrease the area with Cleaner and rub the powder over it again.
• Remove any dust residue from the tip of the nail with a buffer or a fine file (similar motion to that used to shorten the length).
• Apply a super thin layer of SCOTCH Primer to the tip to seal the edge of the nail. Make sure to use very little product; there should be no excess. Let air dry for 30 seconds.
• Apply another coat of Top Reflex NO WIPE to seal everything. For customers who do manual work, it is possible to apply a thin layer of Base Step One before the top coat to ensure greater resistance of the powder. Cure the base for 1 minute, degrease its dispersion layer and apply Top Reflex NO WIPE.

Silica, CI 77891, CI 77000, Silicon.