Strong Base Myrtille Myrtille

• Remove the existing product.
• Carefully mattify the entire nail plate with a 180-grit file or buffer. Avoid leaving any shiny areas, as these would prevent the product from adhering properly.
• Perform the manicure at this stage, if needed.
• Degrease the nails with CACTUS Cleanser or alcohol.

If needed, continue with the following steps:

• Apply CACTUS Nail Prep, then wait 30 seconds for the product to evaporate completely.
• For weak nails, apply Scotch Bonder in a thin layer only on the free edge, from the smile line towards the tip. Wait 1 minute for it to dry completely.
• Apply STEP ONE Base in a thin layer, working it into the nail without touching the skin. Make sure to cover the entire nail surface thoroughly. Cure.
• Apply STRONG BASE in a thin slip layer, then place a bead of product on the nail and use the CACTUS No. 0/7 Brush to level the surface and build the apex. Cure.
• Finish directly with NO WIPE Top Coat, or apply CACTUS Gel Polish first and then finish with NO WIPE Top Coat.

CAUTION: The base is rigid. At the end of the treatment, do not leave the tip too thin. The product must be 1 mm thick at the tip; to achieve this, file across the free edge and shorten the length slightly.

Bis-Hea Poly (1,4- Butanediol)-9/Ipdi Copolymer, Hydroxypropyl Methacrylate, Isobornyl Methacrylate, Bis-Hema Polyneopentyl Glycol Adipate/Ipdi Copolymer, Methacryloylethyl, Phosphate, Ethylene trimethylbenzoyl, Phenylphosphinate,Trimethylolpropane,Trimethacrylate, Silica, Bht, CI 77891, MICA, CI 77491, CI 77742, Tin Oxide