Liquid Gel Light Nude 14 ml Light Nude

1. Carefully remove the old product.
2. Carefully dull the entire surfaceof the nail plate using a240 grit fileor100 grit buffer. Avoid leaving shiny areas, as they may compromise product adhesion.
3. Clean and degrease nails withCleanserand wait approximately 30 seconds for it to evaporate completely.
4. If desired, apply primers.
5. Apply the STEP ONEbase in a thin, massaged layer; thenre-apply the product like a polishand only thencure. Ensure you cover the entire nail surface evenly without touching the skin. If the base does not completely cover the nail plate, the gel will not adhere correctly.
6. Proceed with the application of theLiquid Gelby first applying the slip layer.
7. Place a drop of product in the apex area and then drag it evenly towards the tip.
8. Subsequently, if necessary, even out the surface with athin brush.
9. Flip the finger, keeping the back parallel to a horizontal surface to allow the product to self-level, and once satisfied, cure.
10. Remove the inhibition layer of the product.
11. If the product application is not precise, the surface can be filed. Once this step is complete, be sure to remove dust and degrease the nails again.
12. It can be sealed withReflex top coat, keeping its shade for a clean and natural effect, or, if desired, proceed with the application ofcolorand/ornail art, and then seal.

Removal:The product can be removed with both adrilland afile. For drill removal, a carbide bit is recommended, gradually reducing abrasiveness and RPMs as you approach the nail plate, to ensure safe work.

Useful information:

• Requires the application of a base for adhesion.
• The product, especially in more pigmented colors, should not be applied in thick layers (>1.4mm), otherwise it may not cure.
• The product is recommended for use indual formsonly with less opaque colors. In the case of downturned nails, do not use highly pigmented colors because there is a risk of having thicknesses greater than 1.4 mm.
• When covering the natural nail, to ensure product hold, it is necessary to have a minimum tip thickness of ~0.7 mm. To achieve this, it is necessary to lightly file the free edge to open the thickness and obtain the desired height.

ALIPHATIC URETHANE METHACRYLATE, BIS-HEMA POLYNEOPENTYL GLYCOL ADIPATE/IPDI COPOLYMER, TRIMETHYLOLPROPANE TRIMETHACRYLATE, ISOBORNYL METHACRYLATE, HYDROXYPROPYL METHACRYLATE, HYDROXYCYCLOHEXYL PHENYL KETONE, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, SILICA DIMETHYL SILYLATE, BIS-HEA POLY(1,4-BUTANEDIOL)-9/IPDI COPOLYMER, CI 77891, POLYPROPYLENE GLYCOL, SILICA, CI 16035, P-HYDROXYANISOLE, HYDROQUINONE, CI 15880, CI 77499