Liquid Gel Ballerina Pink 14 ml

1. Carefully remove the old product.
2. Carefully buff the entire surface of the nail plate using a 240-grit file or a 100-grit buffer. Avoid leaving shiny areas, as they may compromise product adhesion.
3. Clean and degrease the nails with Cleanser and wait about 30 seconds for it to evaporate completely.
4. If desired, apply the nail prep products.
5. Apply the base STEP ONE in a thin massaged layer; then apply another thin coat like nail polish and only then cure. Make sure the entire nail surface is covered evenly without touching the skin. If the base does not completely cover the nail plate, the gel will not adhere correctly.
6. Proceed with the application of Liquid Gel, first applying the gliding layer.
7. Place a drop of product in the apex area, then distribute it evenly towards the tip.
8. If necessary, level the surface with a fine brush.
9. Turn the finger over, keeping the nail ridge parallel to a horizontal plane so the product can self-level. Once satisfied with the result, cure.
10. Remove the inhibition layer.
11. If the application is not precise, file the surface. Once finished, remove all dust and degrease the nails again.
12. Seal with Reflex Top Coat to keep its natural shade for a clean effect, or, if desired, apply colour and/or nail art before sealing.

Removal: The product can be removed with either a nail drill or a file. For nail-drill removal, we recommend a carbide bit, progressively reducing both abrasiveness and speed as you approach the natural nail plate to ensure safe work.

Useful information:

• Requires a base coat for adhesion.
• The product, especially in more highly pigmented shades, must not be applied in thick layers (>1.4 mm), otherwise it may not cure correctly.
• We recommend using the product in dual forms only with lower-coverage shades. On downward-growing nails, do not use highly pigmented shades because there is a risk of creating thicknesses greater than 1.4 mm.
• For natural nail overlays, a minimum thickness of approximately 0.7 mm at the tip is required to ensure product retention. To achieve this, lightly file the free edge to expose the thickness and obtain the required height.

ALIPHATIC URETHANE METHACRYLATE, BIS-HEMA POLYNEOPENTYL GLYCOL ADIPATE/IPDI COPOLYMER, TRIMETHYLOLPROPANE TRIMETHACRYLATE, ISOBORNYL METHACRYLATE, HYDROXYPROPYL METHACRYLATE, HYDROXYCYCLOHEXYL PHENYL KETONE,ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, SILICA DIMETHYL SILYLATE, BIS-HEA POLY(1,4-BUTANEDIOL)-9/IPDI COPOLYMER, CI 77891, POLYPROPYLENE GLYCOL, SILICA, P-HYDROXYANISOLE, HYDROQUINONE, CI 15880, CI 77491