Dual Form Russian Almond 2 - 120 pcs

Attention: The discounted price refers to a small imperfection; the numbers on the tips are not clearly legible. This does not affect the functionality of the product. To make it easier to use, we recommend numbering the tips with a permanent marker.

The Dual Forms by Cactus are an alternative to the classic Nail Forms, which allow you to create the entire structure immediately of the nail to be reconstructed.

Thanks to the Dual Forms you can create any natural form from the salon, but also extreme forms thanks to the wide choice that our collection offers.

The Dual Form Cactus are transparent, with guidelines designed to facilitate the application of the product inside, immediately obtaining the desired shape.

They are designed to be flexible but at the same time resistant, feature that allows you to save time when choosing the size and helps to minimize the risk of creating steps in the cuticle area.

What type of nail are Dual Forms suitable for?

Each nail type has a Dual shape that perfectly suits it. Choose the Dual based on the shape of the nail plate you're working on:

If the natural nails are flat (little presence of apex) we will prefer a Dual which has a natural curvature equal to approximately 35%, such as the forms “Stiletto”, “Natural Square” or “Natural Dancer”.

If the natural nails have a very evident “C” curve, we will opt for dual arched ones, with a curvature equal to 50%, such as the forms “Arched Square”, “Arched Ballerina”, “Russian Almond”.

What shapes can be created?

With a single type of Dual Form it is possible (in most cases) to create different shapes during reconstruction.

With the Dual Form Russian Almond, for example, you can only do the Russian Almond shape.

How to understand which size to choose?

To choose the right Dual for each finger, you need to position the tip on the nail and make sure that match the growth points perfectly on the sides of the nail plate. The Dual should "hug" the nail, without applying pressure, perfectly covering the entire surface.

Everything is fine measure is described in the product images.

DUAL FORM APPLICATION

• Remove any old product.

• To make opaque Carefully file the entire surface of the nail plate with a 180-grit file or buffer. Avoid leaving shiny areas because the product will not adhere properly.

• Clean and degrease nails with Nail Prep Cactus, wait 30 seconds for the product to evaporate completely.

• Apply the Scotch Primer Apply a thin layer, massaging it into the entire nail plate. Wait 1 minute for it to air dry completely.

• Apply base Step One Apply a thin layer, massaging the nail while avoiding touching the skin. Be careful to cover the entire nail surface thoroughly. Cure.(Be careful: if you don't cover the nail plate well with the base, you risk the gel not adhering well)

• Choosing the right one Dual Form measurement for each finger

• Apply the chosen product (Gel or Acrygel) in the Dual immediately creating the desired shape. In case, especially - but not only - of self-leveling Gel such as the Mousse or the Sorbetto, particular attention must be paid to the thickness of the sides, so as not to leave them too thin.

• Blend the product in the cuticle area so that towards the end the quantity is practically zero.

• Maintaining an inclination of 45°, place the Dual on the cuticle area, keeping a distance of 2mm from the same.

• Once you are sure that the Dual is straight, lower and reduce the inclination while maintaining pressure in the cuticle fold, until the sides of the Dual are parallel to the finger (It should not go up or down, as this would risk creating an incorrect shape which could then lead to cracks and breakages).

• Use the UV bulb placing it just near the cuticle line and polymerizing for 10 seconds.

• Turn your finger over and remove any excess product or smooth it out with a brush.

• Once the structure is leveled, to polymerize in the lamp for 1 minute. If you wish, to pinch the shape by placing the clamp over the Dual, after 15 seconds of polymerization.

• Remove the Dual by applying light pressure with your fingers on both sides, starting from the growth points and working your way towards the tip.

• Give the desired shape with the file, pass the cutter along the lower part of the nail to remove excess product and finish any steps, if present, with the Carbide finishing tip “Blue Finish d0215”.

• Apply color in two thin coats, if desired, and seal with Top Coat Reflex no Wipe.