Liquid Gel Perfect Milky 14 ml Perfect Milky

1. Carefully remove the old product.
2. Carefully mattify the entire surface of the nail plate using a 240-grit file or a 100-grit buffer. Avoid leaving any shiny areas, as these may compromise the product’s adhesion.
3. Clean and degrease the nails with the Cleanser and wait approximately 30 seconds for it to evaporate completely.
4. If desired, apply the base coats.
5. Apply a thin layer of STEP ONE base coat, massaging it in; then apply another layer of the product and only then cure. Ensure you cover the entire nail surface evenly without touching the skin. If the base coat does not completely cover the nail plate, the gel will not adhere properly.
6. Proceed with the application of the Liquid Gel, first spreading the slip layer.
7. Place a drop of product at the base of the nail and then spread it evenly towards the tip.
8. Next, if necessary, smooth the surface with a fine brush.
9. Turn the finger upside down, keeping the back of the nail parallel to a horizontal surface to allow the product to self-level, and cure once you are satisfied.
10. Remove the dispersion layer from the product.
11. If the application of the product is not precise, you can file the surface. Once this step is complete, ensure you remove the dust and degrease the nails again.
12. It can be sealed with the Reflex top coat to preserve its natural colour for a clean, natural finish, or, if desired, you can apply colour and/or nail art before sealing.

Removal: The product can be removed using either a drill or a file. For removal with a drill, we recommend using a carbide bit, gradually reducing the abrasiveness and speed as you get closer to the nail plate, to ensure safe removal.

Useful information:

• Requires the application of a bonding base coat.
• The product, especially in the more highly pigmented shades, should not be applied in thick layers (>1.4 mm), otherwise it may not cure properly.
• We recommend using the product in dual form only with the less opaque shades. In the case of ingrown nails, do not use highly pigmented shades as there is a risk of thickness exceeding 1.4 mm.
• When covering the natural nail, to ensure the product adheres properly, the tip must have a minimum thickness of ~0.7 mm. To achieve this, lightly file the free edge to open up the thickness and obtain the desired height.

ALIPHATIC URETHANE METHACRYLATE, BIS-HEMA POLYNEOPENTYL GLYCOL ADIPATE/IPDI COPOLYMER, TRIMETHYLOLPROPANE TRIMETHACRYLATE, ISOBORNYL METHACRYLATE, HYDROXYPROPYL METHACRYLATE, HYDROXYCYCLOHEXYL PHENYL KETONE, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, SILICA DIMETHYL SILYLATE, BIS-HEA POLY(1,4-BUTANEDIOL)-9/IPDI COPOLYMER, CI 77891, POLYPROPYLENE GLYCOL, SILICA, P-HYDROXYANISOLE, HYDROQUINONE